TRIAD CN-1
Triad's
header and trimmer component nailing machine is the
professional's choice. This component machine is
designed for the utmost in efficiency. Built from
sound engineering with quality materials and backed by
more than 40 years of experience within the housing
industry.
Designed to speed output while using less manpower, you
save valuable time and money.
This state-of-the-art machine operates by foot pedal
control, clamping and squaring material prior to
nailing. Each tool can be selected to nail material
from 2 x 3 to 2 x 12. Give yourself the edge and
let Triad's years of field proven reliability go to work
for you.
SELECTOR
SWITCHES
Separate on/off switches are used to turn off the
nailing tools that are not required. The guns
activate only after contact with material has been made.
FOOT PEDAL
CONTROL
The foot
pedal activates the side clamp first to square up the
component, and with a split second's delay clamps down
the tools and clamp release allowing the operator to
position the component for the second nailing.
SIDE CLAMP
The side
clamp is easily adjustable for various size material by
moving the cylinder to the various holes provided.
The side clamping cylinder creates up to 800 lbs. Of
pressure for straightening culled lumber.
SQUARING STOP
The
squaring stop is used to square up your component prior
to driving the first nail. Once nailed it's
flipped out of the way so the component can be rolled
through for further nailing. The stop is located
conveniently in front of the operator.
OFF SET
TOOLS
The
nailing tools are off set for nailing wider dimensional
lumber to prevent splitting of the material. The
solid steel tool bar provides a rigid, straight line with
each nailing tool mounted on adjustable castings.
QUICK
MOUNTING BRACKETS
The
nailing tools are mounted with Triad's exclusive mount
blocks for quick detachment of tools if need be.
Also, quick disconnects are used on all air lines and
special trigger activating system. Flow control
mufflers help to extend machine life and reduce sound.
ADJUSTABLE
TOOL SPACING
Triad's
special tool mounts are adjustable for nail
placement. Simply loosen the bolts and slide the
mounts to the desired nail spacing. Cast against
steel creates a natural bushing eliminating costly wear
and assuring longer machine life and quality. Just
one more reason to go with TRIAD.
SPECIFICATIONS
Electrical:
120V/SP 3 AMP
Air: 100 PSI @ 3 CFM
Color: Tan
Weight: Approx. 860 lbs.
Height: 7'
Depth: 4'
Length: 11' with 10' of rollers installed
Tools: Customer to designate name brand and type
Capacity: From 2 x 3 to 2 x 12 material up to 6"
|
